Hammerhead Strut and Spindle Support Front Left (Driver), Black with Two-Bolt Fender Mount for 150cc / 250cc / 300cc- 2.000.027-SS replaces 2010027250GH01, 2010027250GH00, 2.010.027, 2.000.027-B, 14139

* Black strut
* Two bolt fender mount attached
* ROUGHLY 19 1/2" - 19 3/4" tall
* ROUGHLY 3 1/2" spindle

This spindle is typically used on the left (DRIVER) side on many go-karts.  It is used to connect the swing arms to the front wheel hub. 

Spindle details:

• Overall length: 19.5" approximately, includes ball joints
• 12mm x 1.25 ball joints on both ends
• Outside diameter of spindle tube: 33mm [1.3"]
• 14mm x 1.50 threaded shaft for wheel attachment
• Spindle length: 90mm [3.55"]
• Mounting holes at wheel end are 64mm [2.5"] apart
• Two 8.5mm mounting holes at wheel end
• 6mm threaded fender mount holes
• Painted black

Hammerhead Part # 2.000.027-SS
Old TJ Power Sports Part # 2.000.027-B
Old TJ Power Sports Part # 2.010.027 

Trailmaster part # 2010027250GH00

LM150IIR part # 2.000.005-L (USED 4.5" SPINDLE...MUST REPLACE HUB TOO)