My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.


Hammerhead Tie Rod End for 150cc / 250cc / 300cc - 6.000.062 replaces 536-3009

Availability: In stock


Quick Overview

6.000.062, ROD END / TIE ROD END


The tie rod end attaches the tie rod to the strut. This tie rod end is used on nearly all Hammerhead 150cc and 250cc buggies, except for the GTS 250 which uses part # 6.000.062-250.

**Some manuals might say 6.000.062-250, but the -250 tie rod end is ONLY used on the GTS250 with enclosed sides and 5-point seatbelts.**


  • Long Bolt threaded length: 1.5" / 40mm:
    • Thickness: M10 (Metric 10mm)
  • Short Bolt threaded length: 19/32" (0.6") / 16mm
    • Thickness M10 (Metric 10mm)
    • Standard threads

The tie rod may or may not come with reverse thread nut on long bolt, and two (2) washers and castle nut for short end. Cotter pin will not be included even if other hardware is.  It depends how we receive these from the factory whether or not they will come with the proper hardware.

Hammerhead Part # 6.000.062 

Carter Brothers part # 536-3009

Trailmaster part # 6.000.062-250 (different than Hammerhead part # 6.000.062-250

Additional Information

Video No