Hammerhead SUPER 30 Series Juggernaut Driver, Front Clutch - Super30
Super 30, Juggernaut Front Clutch for 30 Series
Frequently bought together
The Juggernaut Super 30 Driver is everything the original 30 series driver slacks under load. No longer do you have to sacrifice your engine's power or rpm capabilities! With this new Super 30 Series Driver, you can take full advantage of a high Horsepower, high RPM small block engine (196 / 208 / 212). The Super 30 Series Driver is compatible with ALL 3/4"bore 30 series Torque Converter kits, you can use the same belt, rear clutch (9.500.001), and belt cover! This driver is recommended to be used with higher rpm engines. On a stock motor running at 3600 rpm you will not see much difference in performance, running 4000+ rpm is wherethe Juggernaut shines.
-No more slipping under load.
-Has been tested up to 8500 rpm
***DO NOT RUN WITHOUT A BELT***
***MAKE SURE TO USE AN IMPACT WHEN INSTALLING***
***SHIMS MAY NEED TO BE ADDED TO LINE UP CLUTCHES SO BELT DOES NOT RIDE AT AN ANGLE***
***REPLACEMENT FOR PART # 9.500.010, Front Clutch Variator***
Featuresand Specs:
-
Bore:3/4" (.750")
-
Key-way:3/16"
-
3/4"wide asymmetrical belt
-
Engagement:2,500 RPM
-
RPMCapabilities: 8,500+ RPM
-
All new design with 3 rollers and 6 springs
-
No adjustments needed
-
Limits/Eliminates belt slippage
-
Improved Reliability and Performance on high HP small block engines
-
Compatiblewith all 30 series TAV kits with 3/4" bore (comet andaftermarket)
-
Slightly larger diameter then a regular 30 series driver but still works with the same covers and belt
| Price | $94.99 |
|---|---|
| Color Combinations | Black |
