We're Here to Help
info@hammerheadperformance.com
Mon - Fri / 9:00AM - 4:00PM CST
DETAILS
DETAILS
Genunie, OEM, Hammerhead 150cc Reverse Assembly for GY6 150cc Vehicles with an External Reverse Gearbox. This 150cc External Reverse Assembly (slip over yoke) is the reverse assembly that is used on all Hammerhead go-karts with ONLY Forward and Reverse. Will not work on 150cc vehicles that have a Forward, Neutral, and Reverse gearing setup.
Gearbox details:
- 16 tooth sprocket
- Sprocket OD: 87.4mm [3.43"]
- Gear shaft ID: 20mm [.787"]
- Opposite side ID: 16.8mm [.662"]
- OD of gearbox: 130mm [5.14"]
- (2) studs 91mm [3.58"] apart center-to-center
- (2) threaded holes in side of case
Guarnteed to fit on these models below:
- 2009-2011 GTS 150
- GT150
- SS150
- Standard Hammerhead (UM150IIR)
- Junior Hammerhead (UM125IIR)
- UM150
- LM150
- Carter Talon series with external reverse
If your buggy has separate F / N / R (Forward, Neutral, and Reverse) gears, the vehicle has an internal reverse, and this reverse assy will not work with those vehicles.
This reverse gearbox assembly was used in a variety of Hammerhead vehicles, including 1st generation GTS models, all GT150 models, SS150, Standard 150, JR 150, and various other non-Hammerhead brands such as Carter Bros, Kinroad, SUNL, Massimo, Roketa, and more.
Hammerhead Part #6.000.019 is not available anymore from Hammerhead, but this product will replace 6.000.019 when used with the bracket, part # 8.020.173 (sold separately) to retrofit.
Hammerhead Part #s 8.010.124, 8.010.125, 9.030.007 are all included with this assembly and are NOT sold separately from Hammerhead or other vendors.
This product is the same as the following vehicle specific part #s (can also apply to vehicles not listed here):
Hammerhead part # 6.000.157
Old TJ Power Sports part # 6.000.019
Carter Brothers part # 639-0013
REVIEWS
REVIEWS
Frequently Asked Questions
Will this fender fit my American Landmaster UTV?
Will this fender fit my American Landmaster UTV?
Yes, this rear left driver-side fender is designed to fit compatible American Landmaster UTV models. Be sure to verify your model and OEM part number before ordering.
Is this an OEM replacement part?
Is this an OEM replacement part?
Yes, this fender is designed as a direct OEM-style replacement for part number 56-18162, providing reliable fitment and factory-style appearance.
Which side of the vehicle does this fit?
Which side of the vehicle does this fit?
This fender installs on the rear driver-side (left side) of the vehicle.
What material is the fender made from?
What material is the fender made from?
The fender is constructed from durable molded plastic designed to withstand off-road conditions, mud, debris, and everyday trail use.
Does this include installation hardware?
Does this include installation hardware?
Hardware may not be included unless otherwise specified in the product listing. We recommend reusing existing hardware or checking product details for included components.
Can I install this fender myself?
Can I install this fender myself?
Yes, this fender is designed for straightforward bolt-on installation using standard tools. Professional installation is not typically required.
MORE TO EXPLORE
OEM STOCK PARTS
Replacement Stock Parts - Sometimes Even Better
COMPETITIVE PRICING
We're An Importer And Pass On The Savings To You
SALES & SUPPORT
We Stand Behind Our Products